1/48 Academy AH-64D LongBow

Republic of Singapore Air Force (RSAF) 

AH-64D Apache   Kit 2125

by Low Jer Wei

--------------------

  Singapore National Day 

 

Some of my fellow modeller and I have started on a group build on Republic of Singapore Air Force (RSAF) A-4 skyhawk to be submitted for the Singapore's national day on 9 August 05, but alas, Murphy dictates otherwise. So here is my Academy 1/48 AH-64D Apache completed as a Republic of Singapore Air Force (RSAF) AH-64D Apache. The RSAF Apaches are still overseas in the States on training and will only be brought back to Singapore soil sometime later. So the model does not have any squadron markings and only have the RSAF lion head insignia plus other general stencils. So you can call the model a "what-if" if you like.

The kit is built OOB except for some improvements here and there to make construction easier. The kit is not a high scorer in the accuracy department, but overall it still resembles a Apache once finished. I have been working on the kit on and off for more then 1 year and intended buying it to use as a "familiarization" kit before I started on the Hasegawa kit. The breakdown and construction is similar and the experience gained with the Academy kit I hope will really make working on the Hasegawa kit almost trouble-free :)

Click on images below to see larger images

As mentioned, accuracy is not one of the strong points of the academy kit but at 3 feet away, it sure does looks like an Apache. So for the cockpit, the kit pats are used and painted to look, well, like a cockpit.

Click on images below to see larger images

The rest of the construction went almost trouble-free except for the bigger parts like the avionics bay and fuselage halves needing some coaching with an extra dab of super glue to get them to meet properly.  

The construction of the cockpit windows takes a bit more effort as there are no positive locating place to fix them. All the placements are eye-balled and super-glued using risky "surgical" precision. One wrong move and you'll end up with frosted clear part !

Click on images below to see larger images

 

The other tricky part is the cannon. Too many small fiddlely parts. I end up breaking and losing the parts for the wire "cage" around the cannon and have to fabricate new ones from copper wire.

 

Click on image below to see larger image

The rotor hub is also spruced up with some copper wire to make it busy looking.

Click on images below to see larger images

The kit part for the "disco" light is discarded and using a thin copper sheet cut to the correct length based on the part diameter, squares are scribed on and the part rolled into a tube and both ends were capped with plastic card. The copper colour does make the "disco" light more realistic then the plastic kit part.

Click on images below to see larger images

I have also fabricated a pair of warning receivers to be placed on the tail boom as per what I found on photos of RSAF Apaches found on the Internet. The rest of the construction went without any major hitches.

Click on images below to see larger images

For painting, I used Vallejo airbrush colours for all the airbrush work. For brush work I also used Vallejo paint with the white cap.

Jer Wei

 

Click on images below to see larger images

Photos and text © by Low Jer Wei