I
started this kit back in Feb 2008, thinking that I needed something a little
more challenging. And challenging it is as the entire project took me 16 months
to complete. Part of the obstacle was getting the modification done on the
wings. I used Cutting Edge’s correction set and Blackbox wing fold set to get
the right look. Also, re-scribing the panel lines took me sometime as much
effort was spent on doing research to ensure correctness (more or less…).
It
is in my opinion that the Monogram Prowler’s nose is a tad bit too short, so I
added styrene sheets as shims to lengthen and re-shape the nose. You can be the
judge if the result is worth the effort. I also re-shaped the tail radome based
on pictures and line drawings. The other aftermarket stuff I added was the
Blackbox resin cockpit. Here I must say Blackbox’s offering has IP up to
ICAPII Blk89A, which is very good for those who wish to build a late model
Prowler (short of ICAPIII, that is).
Other
modifications include replacement of the exhaust using brass pipe, re-shaping of
the CE seamless intake (as it was originally meant for A-6 more than EA-6),
scratched the entire stairwell and stair with styrene cards of various
thickness, detailing the landing gears and adding of Royale Resin’s weighted
wheels, a must have, in my opinion, unless you prefer racing slicks on the
aircraft : )
Click on
images below to see larger images
The
kit was painted entirely with thinner based Gunze colors. Weathering was done
with MIG enamel wash and some post shading with super diluted Tamiya X-19 at
selected areas. The actual bird I saw from photo references depicted a
relatively clean CAG bird, so I opted to keep the paint scheme rather clean. The
decals used were from “SuperScale” and I had great difficulties with them as
the decal reacted with my usual technique of final coating my model with Gunze
“Mr Super Clear”. I ended up having to mask and paint the tail art instead
because of the “wrinkling” effect. I rounded up the project by placing the
aircraft on a base made up of a resin deck by “Just Plane Stuff” mounted on a
chopping board and accessories from “Flightpath” and “PMWP”.
In
the end, almost nothing is left untouched from the original kit except maybe the
overall shape is preserved. I think most people are already familiar with the
short-comings the Monogram (now Revell) kit has. But having said that, it is
still the ONLY 48scale offering and decent finishing can be achieved OOB. If
you, however, wanted something more accurate for your Prowler, please be
prepared to invest in some AM stuffs and tonnes of references.
Lastly,
despite the uphill journey throughout the entire project duration, I have many
hours of fun putting it together and being able to overcome issues after issues
were especially rewarding. I guess this is what this hobby is all about. The
reward was especially sweet when I entered this build for the local competition
and came up 1st in my class. I am satisfied with the final result and
hope you can share my joy too. If you are interested to read the in-progress
built you can follow the link below. Thank you for reading.
http://www.arcforums.com/forums/air/index.php?showtopic=143568&st=0&start=0
Chris Chen
Click on
images below to see larger images
|